CRYSTAL™ Elevator Specs

Specs:

  • Lifting capacity: 800 to 1400lb
  • Travel Speed: 25 to 50 ft/min
  • Travel distance: Up to 50’

Carriage:

  • Carriages are built to suit variable shaft sizes adapting to building space requirements
  • Structural steel members with durable powdercoated finish
  • Recessed lighting
  • Customizable panels (wood, veneer, painted or plain MDF for your own customization)
  • Removable center panel on roof for easy access
  • Controls located behind panel for easy access

Controls:

  • 24V carriage and landing controls
  • Automatic or constant-pressure operation
  • Keyed operation for increased security
  • Flexible PLC logic controls

Drive System:

  • Counter-balanced Traction Sheave Drive with self-locking gearbox reduction
  • Optional Auto-Lowering available in event of power failure
  • All machine and electrical components are contained within the shaft-way, eliminating the need for a separate machine room.
  • Emergency manual cranking in both up and down directions in the event of power failure

Power:

  • 20A/220V/1PH & 15A/110V/1PH c/w fused lockable disconnects
  • 1.5 H.P. 3 phase motor with variable frequency speed control
  • Optional RAM Tower of Power full battery backup - allows for regular use of the elevator, in both an up and down direction for up to 30 cycles, in the event of a power failure
  • 1 H.P. 3 phase motor with variable frequency 4 stage speed control
  • Full DC battery backup available
Shaftway Construction
  • Easy installation into existing or new buildings
  • Does not require backing plates or reinforced concrete walls, can be placed in a typical-framed wood shaftway
  • 2” x 6” wood frame structure as per supplied installation drawings, with painted drywall finish on inside as desired
  • Designed to fit within standard 96” ceiling height at top floor eliminating the requirement for machine room or additional overhead clearance

Installation:

  • CRYSTAL can be placed directly onto an existing concrete slab and requires only a 3” depression for flush access at bottom floor if desired
  • CRYSTAL™ is modular and all components are design to fit through standard door openings so that it can be installed once other construction is complete
  • No special lifting tools or machines are necessary as all components can be installed by hand

Doors:

  • Fire-rated to 1 hour floor penetrations
  • Mechanical or Electrical elevator certified interlocks prevent the doors from opening when carriage is not at the landing
  • Automatic or manual operation


Available doors include:

  • Manual bi-folding doors with ½ the swing of a conventional door for easy access and large glass panels for improved visibility
  • Standard swing doors for higher fire rating requirements
  • Automatic sliding doors similar to typical passenger elevators
  • Carriage Light curtain  which uses sensors to detect motion outside of carriage envelope and stops the carriage automatically if breached
  • Carriage aluminum folding gate with automatic opener

Code Compliance:

  • Residential – CAN/CSA B613-M87 – ASME A17.1/CSA B44 Part V
  • Commercial – CAN/CSA B355-09 – ASME A18.1 & A17.1/CSA B44 Part V including LULA

Warranty:

RAM CRYSTAL™ Elevator is covered by a 1 year warranty. Please contact RAM for complete details

Options:

  • RAM Tower of Power full battery backup - allows for regular use of the elevator, in both an up and down direction for up to 30 cycles, in the event of a power failure
  • In-carriage telephone
  • Automatic carriage and hall doors
  • Remote monitoring
  • Various carriage finishes and lighting



 
  © 2011 RAM Manufacturing Ltd.